203 magnified view – Canon EOS Rebel SL3 DSLR Camera with 18-55mm Lens (Black) User Manual
Page 203
203
Magnified View
To check the focus when the AF method is
other than
[
u
+Tracking]
, magnify display
by approx. 5× or 10× by pressing the <
u
>
button or tapping
[
Y
]
in the lower right.
Magnified view is not available with
[
u
+Tracking]
.
z
To move the AF point, press the <
V
> cross keys or tap on the spot
you want to magnify.
z
Either press the <
u
> button or tap on
[
Y
]
to magnify the area
covered by the magnifying frame. Each time you press the <
u
> button
or tap on
[
Y
]
, the magnification ratio changes.
z
Magnification is centered on the AF point for
[Spot AF]
, and
[1-point
AF]
and is centered on the Zone AF frame for
[Zone AF]
.
z
Autofocusing is performed with magnified display if you press the
shutter button halfway when set to
[1-point AF]
, or
[Spot AF]
. When
set to other AF methods, autofocusing is performed after restoring
normal display.
z
With Servo AF, if you press the shutter button halfway in the magnified
view, the camera will return to the normal view for focusing.
z
If focusing is difficult in the magnified view, return to the normal view and
perform AF.
z
If you perform AF in the normal view and then use the magnified view,
accurate focus may not be achieved.
z
AF speed differs between normal view and magnified view.
z
When in magnified view, Movie Servo AF (
z
With the magnified view, achieving focus becomes more difficult due to
camera shake. Using a tripod is recommended.