Canon EOS Rebel SL3 DSLR Camera with 18-55mm Lens (Black) - Manual (Page 276)

276
Manual Sensor Cleaning
Dust that could not be removed by the automatic sensor cleaning can
be removed manually with a commercially-available blower, etc. Before
cleaning the sensor, detach the lens from the camera.
The image sensor is extremely delicate. If the sensor needs to
be cleaned directly, having it done by a Canon Service Center is
recommended.
1
Select [Sensor cleaning].
z Under the [ 5 ] tab, select [Sensor
cleaning] , then press < 0 >.
2
Select [Clean manually].
z Select [Clean manually] , then press
< 0 >.
3
Select [OK].
z Select [OK] , then press < 0 >.
B In a moment, the reflex mirror will lock
up and the shutter will open.
4
Clean the sensor.
5
End the cleaning.
z Set the power switch to <
2
>.
z If you use a battery, make sure it is fully charged.
z Using the household power outlet accessories (sold separately, = 461) is
recommended.
N