Canon EOS Rebel SL3 DSLR Camera with 18-55mm Lens (Black) - Manual (Page 37)

37
Installing and Removing the Battery
and Card
Load a fully charged Battery Pack LP-E17 into the camera. The camera can
use an SD, SDHC, or SDXC memory card (sold separately). UHS-I Speed
Class SDHC and SDXC memory cards can also be used. The captured
images are recorded onto the card.
z Make sure the card’s write-protect switch is set upward to enable writing/
erasing.
Installing the Battery and Card
1
Open the cover.
z Slide the lever as shown by the arrows
and open the cover.
2
Insert the battery.
z Insert the end with the battery contacts.
z Insert the battery until it locks in place.
3
Insert the card.
z As shown by the illustration, face the
card’s label side toward the back of
the camera and insert it until it clicks
in place.
(2)
(1)
(1)
(2)
(2)
(1)