Extron electronic VGA MATRIX SWITCHERS MVX PLUS 128 - Manual (Page 48)

Operation, cont’d
MVX Plus 128 VGA Matrix Switchers • Operation 3-26
PRELIMINAR
Y
4 . Press and release the Enter button (fi gure 3-47). The confi guration stored in
the selected memory location is now the current confi guration and can be
viewed in the View-Only mode (see example 4).
C O N T R O L
PRESET ENTER ESC VIEW
The Enter and Preset
buttons return to unlit or
background illumination.
Press the Enter button to
recall the preset.
All input buttons and output
buttons return to unlit or
background illumination.
Figure 3-47 — Press the Enter button
Muting and unmuting video and/or audio outputs
Individual outputs can be muted or unmuted as follows:
1 . Press the Esc button to clear any input button indications, output button
indications, or control button indications that may be on.
2 . Press and release the View button.
3 . Select video, audio, or both to mute or unmute by pressing the RGBHV
button and/or the Audio button.
4 . One at a time, press and hold the button(s) for the desired output(s) for
approximately 2 seconds. The output LED(s) for the selected output(s) blink
to indicate the mute or return to their previous state to indicate the unmute.
5 . Press and release the View button to return to normal switcher operation.
N • You can mute video and audio, video-only, or audio-only outputs. Pressing
and releasing the RGBHV button and the Audio button toggles each selection
on and off.
• When you enter View-Only mode, the output LEDs turn on for all outputs
without ties.
• The video mute function mutes the R, G, and B planes only; the H and V
planes are still active.
• Mutes are saved to non-volatile memory. When power is removed and
restored, the mute settings are retained.