Extron electronic VGA MATRIX SWITCHERS MVX PLUS 128 - Manual (Page 105)

5-17 MVX Plus 128 VGA Matrix Switchers • Matrix Software
PRELIMINAR
Y
Name presets — Allows you to assign a name to each of the 32 memory presets.
N Preset names are limited to 12 upper- and lower-case alphanumeric characters,
space, and the _ : = and / characters.
N The following characters are invalid in preset names:
+ ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.
Show RS-232 strings — Displays the ASCII commands that are used by the current
confi guration. You can refer to these for RS-232 programming.
I/O group settings — Allows you to establish I/O groups.
Room confi guration — Allows you to assign outputs to rooms or delete outputs
from rooms.
N A Room is a subset of outputs that are logically related to each other, as
determined by the operator. The MVX Plus 128 switcher supports up to
10 rooms, each of which can consist of from 1 to 16 outputs.
Initialize — Initializes and clears any or all of the following: ties, presets, audio
confi guration, preset names, icon names, and icons.
Preferences menu
Immediate changes — Causes confi guration changes to take
effect immediately.
Hold/verify changes — Delays implementation of
confi guration changes until the Changes – Take button
is pressed.
Ties as lines — Displays ties as lines (fi gure 5-10).
Figure 5-10 — Ties shown as lines