Extron electronic VGA MATRIX SWITCHERS MVX PLUS 128 - Manual (Page 118)

HTML Operation, cont’d
MVX Plus 128 VGA Matrix Switchers • HTML Operation 6-10
PRELIMINAR
Y
Email address fi elds
The eight Email address fi elds identify the e-mail addresses of the personnel to
whom the MVX 128 switcher e-mails notifi cation of its failure and repair status.
Standard e-mail address conventions (nnnnn@xxx.com) apply.
The check boxes and drop boxes associated with each address fi eld permit the
operator to specify specifi c criteria under which the switcher will e-mail recipients.
In the associated Missing Input drop boxes, select the inputs to monitor for
presence or absence of a signal. Check the Fans and Power boxes to monitor the
cooling and power supplies. In the associated E-Mail Options drop box, select
whether the recipient is to be e-mailed of failures, fi xes, both, not notifi ed, or to
be removed from the e-mail list. The Suspend option is useful for temporarily
removing personnel from the e-mail list when they are unavailable, such as on
travel or vacation. Deleting an e-mail addressee and clicking the submit button
removes the recipient from e-mail notifi cation completely.
Firmware Upgrade page
The Firmware Upgrade page provides a way to replace the fi rmware that is coded
on the switcher’s control board without taking the switcher out of service, opening
the switcher enclosure, and replacing the fi rmware chip. Access the Firmware
Upgrade page (fi gure 6-8) by clicking the Firmware Upgrade link on the System
Confi guration page.
Select Email Settings.
Refresh.
Select System Configuration.
Figure 6-8 — Firmware Upgrade page
Update the switcher fi rmware as follows:
N The Firmware Upgrade page is only for replacing the fi rmware that controls all
switcher operation. To insert your own HTML pages, see File Management
Page, on page 6-11.
1 . Visit the Extron web site, www.extron.com, select the CrossPoint/MAV Plus
product category, select the latest fi rmware installation package (*.exe fi le) for
the switcher, and download the fi le
. Note the folder to which you save the
fi rmware fi le.