Extron electronic VGA MATRIX SWITCHERS MVX PLUS 128 - Manual (Page 117)

6-9 MVX Plus 128 VGA Matrix Switchers • HTML Operation
PRELIMINAR
Y
Email Settings page
Reach the Email Settings page (fi gure 6-7) by clicking the Email Settings link on the
System Confi guration page. The Email Settings page has fi elds for setting up the
switcher’s e-mail notifi cation capabilities. For the e-mail settings and for each row
of the e-mail notifi cation settings, click the Edit button to make the fi elds available
for editing. The button changes to Save. After editing the settings associated with
the Edit/Save button, click the Save button.
Refresh.
Select Firmware Upgrade.
Select System Configuration.
Figure 6-7 — Email Settings page
Mail IP Address fi eld
The Mail IP Address fi eld displays the IP address and the domain name of the mail
server that handles the e-mail for the facility in which the MVX 128 switcher is
installed.
Valid IP addresses consist of four 1-, 2-, or 3-digit numeric octets separated by dots
(periods). Each fi eld can be numbered from 000 through 255. Leading zeroes, up to
three digits total per fi eld, are optional. Values of 256 and above are invalid.
Domain Name fi eld
The Domain Name fi eld displays the domain name that the MVX 128 switcher uses
to log on to the e-mail server. Standard domain name conventions (for example:
nnnnn@xxx.com) apply.
N The following characters are invalid in a domain name:
{space} + ~ , = ‘ [ ] { } < > ’ “ ; : | \ and ?. The @ character is
acceptable only as the lead-in to the domain name (such as @folklore.net).