NEC 40,000-Lumen 4K Laser Installation Projector User Manual

Page 36

2. Projecting an Image (Basic Operation)

4. Pull the band to hold the power cable.

Pulling the knob in the arrow direction allows you to adjust

the band position.

Pull the top and bottom bands by keeping their balance.
Once the band position is adjusted, release the knob to

lock.

Knob

This completes the attachment of the power cable stopper.

Removing the power cable from the power cable stopper

1. Pull the knob of the clamper and loosen the band.

2. Pull the knob and slide the clamper away from the

power plug.

CAUTION

• The projector may become hot temporarily when the power is turned off or if the AC power is disconnected while

the projector is projecting. Take care when handling the projector.