NEC 40,000-Lumen 4K Laser Installation Projector User Manual
Page 134
117
5. Using On-Screen Menu
PROGRAM TIMER
This option turns on/standby the projector and changes video signals automatically at a specified time.
NOTE:
• Before using [PROGRAM TIMER], make sure that the [DATE AND TIME] feature is set. (
→
)
Make sure that the projector is in the standby condition with the POWER cable connected.
The projector has a built-in clock. The clock will keep working for about a month after the main power is turned off. If the main
power is not supplied to the projector for a month or more, it requires to set [DATE AND TIME SETTINGS] feature again.
Setting a new program timer
1. On the PROGRAM TIMER screen, use the
▲
or
▼
button to select [SETTINGS] and press the ENTER button.
The [PROGRAM LIST] screen will be displayed.
2. Select a blank program number and press the ENTER button.
The [
(EDIT)] screen will be displayed.
3. Make settings for each item as required.
ACTIVE .................. Place a check mark to enable the program.
DAY ........................ Select days of the week for the program timer. To execute the program from Monday to Friday, select [MON-
FRI]. To execute the program in everyday basis, select [EVERYDAY].