NEC 40,000-Lumen 4K Laser Installation Projector User Manual
Page 124
107
5. Using On-Screen Menu
[PICTURE SETTING]
This sets the division conditions for reducing or enlarging the image area and displaying it in the desired position or
for projecting using a combination of several projectors.
Please refer to "4. Multi-Screen Projection" (
→
MODE
OFF
Use the projector in a standalone state.
ZOOM
This adjusts the position and width of the video area that you wish to divide. The edge
blending width will also be automatically set to that width.
TILING
This assigns the divided screens to the projectors.
ZOOM
HORIZONTAL
ZOOM
This enlarges the video area in the horizontal direction.
VERTICAL
ZOOM
This enlarges the video area in the vertical direction.
HORIZONTAL
POSITION
This shifts the video area in the horizontal direction.
VERTICAL PO-
SITION
This shifts the video area in the vertical direction.
TILING
WIDTH
This selects the number of projectors to be arranged horizontally.
HEIGHT
This selects the number of projectors to be arranged vertically.
HORIZONTAL
POSITION
This selects the position of the projector starting from the left among those arranged
horizontally.
VERTICAL PO-
SITION
This selects the position of the projector starting from the top among those arranged
vertically.