NEC 40,000-Lumen 4K Laser Installation Projector - Manual (Page 186)

169
8. Appendix
LIGHT Indicator
Indicator display Projector status Procedure
Off The light module is turned
off. –
Lit Green Light module lit –
TEMP. Indicator
Indicator display Projector status Procedure
Off No problem
Flashing Red Temperature problem Ambient temperature is out of the operation temperature.
Check if any obstruction stays near the exhaust vent.
Lit Red High surrounding tem-
perature The surrounding temperature is high. Lower the room
temperature.
SHUTTER Indicator
Indicator display Projector status
Off Shutter is open.
Flashing Green Performing the lens calibration.
Orange Lens calibration implement request.
Lit Green Shutter is closed.
Orange On screen muting
KEY LOCK Indicator
Indicator display Projector status
Off [CONTROL PANEL LOCK] [OFF]
Lit Orange [CONTROL PANEL LOCK] [ON]
REAR LED
When [REAR LED] under [NOTIFICATION SETTINGS] is set to [ON], the operation is as shown below. When set to
[OFF], the rear LED is always off.
Light status indicator
Off: The light module is turned off
On (white): Light module lit System status indicator
Operates in the same way as the STATUS
indicator.