GeoVision GV-R1352 Card Reader (13.56 MHz) - Manual (Page 74)

GV-DFK1355
65
8
8.3 Physical Descriptions
⚫ Cable Connector: Connect the reader to the controller based on the following pin
definitions:
Pin Wire Color Wiegand RS-485
1 Red DC 12V DC 12V
2 Black Ground Ground
3 Yellow - RS-485+
4 Blue - RS-485-
5 Gray - Input 2 (Exit Button; NO)
6 Pink - Relay +
7 Orange & White Relay -
8 Orange - Input 1 (Door Sensor; NC)
9 Brown Green LED Control -
10 Purple Beep Control -
11 White Case Sensor GND
(To Controller Input COM)
-
12 Green Case Sensor
(To Controller Temper Sensor)
-
13 Red & White Wiegand Data 0 -
14 Gray & White Wiegand Data 1 -