GeoVision GV-R1352 Card Reader (13.56 MHz) - Manual (Page 7)

v
2.3.2 Connect through RS-485 Interface ...............................................................18
2.3.3 Define Readers on GV-AS Controller Web Interface ....................................19
2.4 Install GV-R/RK/DFR Config AP .............................................................................21
2.5 Overlay Card Numbers on GV-DVR/NVR Live View ...............................................22
2.5.1 Define the ID and Set the Reader to Slave ...................................................23
2.5.2 Add the Reader to GV-DVR/NVR .................................................................25
2.6 Control the Beeper and LED ...................................................................................26
2.6.1 Enable External Control on the Reader ........................................................26
2.6.2 Connect the Beeper and LED .......................................................................28
2.6.3 Set the Beeper and LED for Each Door/Gate ...............................................29
2.7 Configure GID ........................................................................................................30
2.8 Firmware Upgrade ..................................................................................................32
2.9 Specifications .........................................................................................................33
2.10 Accessory (GV-RK1352 and GV-R1352 Only) ......................................................34
Chapter 3 GV-RKD1352...................................................................... 35
3.1 Packing List ............................................................................................................35
3.2 Compatible Products ..............................................................................................35
3.3 Physical Descriptions .............................................................................................36
3.4 Installation ..............................................................................................................38
3.5 Keypad ...................................................................................................................39
3.6 LED Status and Beeper ..........................................................................................39
3.7 Firmware Upgrade ..................................................................................................40
3.8 Specifications .........................................................................................................41
Chapter 4 GV-R1355 ........................................................................... 42
4.1 Packing List ............................................................................................................42
4.2 Compatible Products ..............................................................................................42
4.3 Physical Descriptions .............................................................................................43