GeoVision GV-R1352 Card Reader (13.56 MHz) - Manual (Page 28)

GV-RK1352 / R1352 / DFR1352
19
2
2.3.3 Define Readers on GV-AS Controller Web Interface
Since multiple readers can connect to GV-AS Controller using one RS-485 interface, you
need to specify which door each reader controls. This section explains how to define readers
on the Web interface of GV-AS Controller. On the Web interface, you can also set the reader
to read the GID or UID on your card / fob. Note that the Web interface of different GV-AS
Controller models varies.
1. On the controller ’s Web interface, click Extended Reader . This dialog box appears.
2. In the GV-Reader/CR420/GF1921/GF1922 section, select the RS485 checkbox in front of
the ID number and type the Serial Number on the rear panel of the reader. The ID
number will be assigned to the reader.
GV-R1352
Red 7.5V~12VDC
Black GND
Green Wiegand Data 0
White Wiegand Data 1
Blue RS-485+
L Blue RS-485-
A B C D
Yellow Beeper
Orange Green LED
L Red Red LED
Brown N/A
Purple N/A
Gray N/A
© 2011 GeoVision, Inc. All rights reserved.
All GeoVision Products are made in Taiwan.
666666666666
V1 V2
3. Select a door/gate for the reader from the Function drop-down list.