GeoVision GV-R1352 Card Reader (13.56 MHz) - Manual (Page 73)

Chapter 8 GV-DFK1355
GV-DFK1355 is a keypad reader capable of reading PIN codes and access cards. It features a
slim profile design, making it suitable for installation on a narrow door frame or in tight spaces.
Thanks to its Wiegand and RS-485 interfaces, GV-DFK1355 can be connected to a variety of
access control systems. With an ingress protection rating of IP66, the reader can be used in
any environment.
Additionally, the GV-DFK1355 reader, which has two inputs (Exit Button and Door Sensor) and
one output (Door Lock), can control a single door when combined with the GV-AS Bridge
controller and the cloud-based software GV-Cloud Access Control.
8.1 Packing List
1. GV-DFK1355
2. Cable
3. Hex Key Wrench
4. Screw x 3
5. Quick Start Guide
8.2 Compatible Products
•
GV-ASManager (software) : V5.3.3 or later
•
GV-AS210 / 2110 / 2120, GV-AS810 / 8110 / 8111, GV-AS410 / 4110 / 4111 (controller) :
V2.41 or later (only Weigand interface supported)
•
GV-AS1620 (controller) : V1.05 or later
•
GV-CS1320 (controller) : V3.10 or later
Cloud Integration
•
GV-Cloud Access Control (cloud-based software): V1.00 or later (coming soon)
•
GV-AS Bridge (controller): V1.00 or later (coming soon)
Note: To connect GV-DFK1355 to the cloud-based software GV-Cloud Access Control,
GV-AS Bridge is required. See 8.8 GV-Cloud Access Control Integration .