GeoVision GV-R1352 Card Reader (13.56 MHz) - Manual (Page 40)

GV-RK1352 / R1352 / DFR1352
31
2
4. Click Setup to apply the setting. The serial number and firmware version of the reader is
automatically detected.
To use GID, make sure that your card / fob has two sets of digits as shown below. If your
card / fob has only one set of digits, GID is not supported.
138,08572 14001110
UID GID
140
011
64
138
,08
572
UID
GID