GeoVision GV-R1352 Card Reader (13.56 MHz) - Manual (Page 72)

GV-R1354
63
7
2. Run the Tool. This dialog box appears.
3. Select Load F/W (*ISP) File to locate the firmware file.
4. Select Upgrade Target (Program) to start firmware upgrade.
5. When the firmware upgrade is complete, run the Setup App to initialize the reader.
6. Select the COM port that is connected to the reader, and select Open COM .
7. Select Initialize . When the initialization is complete, a Success message will be
displayed.
7.7 Specifications
For details, please see the datasheet .
For the number of readers supported by a variety of GeoVision controllers, see the
compatibility table .