Epson EcoTank Photo ET-8500 Wireless Color All-in-One Supertank Printer - Manual (Page 47)

47
You see a screen like this:
3. Select Wi-Fi (Recommended) .
4. Select Start Setup or Change Settings .
5. Select Push Button Setup (WPS) .
6. Follow the instructions on the LCD screen to complete WPS setup.
Note: Make sure you press Start Setup within two minutes of activating WPS on your router.
7. Select the home icon to return to the Home screen.
The Wi-Fi icon displayed on the LCD screen indicates your wireless connection status. If the
product is not connected to the network, repeat these steps to try again.
If you are printing from a computer, make sure you installed the network software as described on
the
Start Here sheet.
Parent topic: Wi-Fi Protected Setup (WPS)
Printing a Network Status Sheet
You can print a network status sheet to help you determine the causes of any problems you may have
using your product on a network.
1. Make sure a few sheets of plain paper are loaded in the cassette.
2. Select the home icon, if necessary.