Epson EcoTank Photo ET-8500 Wireless Color All-in-One Supertank Printer - Manual (Page 267)

267
LCD screen message Condition/solution
Printer error. Turn the
power off and on again.
If the problem persists,
press "Proceed." Turn the product off and then back on again. If the error continues, check for
a paper jam or any protective material inside the product. If there is no paper
jam or protective material, contact Epson for support.
An error occurred while
saving. Check and if
necessary, change the
memory device. The external storage device, such as a memory card, may be damaged.
Check the device.
Have you loaded the
following paper in the
XX? Load the size and type of paper in the indicated paper source. Change the
paper or print settings as necessary.
The printer's borderless
printing ink pad is
nearing the end of its
service life. It is not a
user-replaceable part.
Please contact Epson
support. The ink pads are near the end of their service life and the message will be
displayed until the ink pad is replaced. Contact Epson for support. (To
resume printing, select
OK .)
The printer's borderless
printing ink pad has
reached the end of its
service life. It is not a
user-replaceable part.
Please contact Epson
support. The ink pad is at the end of its service life. Borderless printing is not
available, but printing with a border is available. Turn off the product and
contact Epson for support.
Paper Configuration is
set to Off. Some
features may not be
available. For details,
see your documentation. The Paper Configuration setting must be enabled to use AirPrint. Select
Settings > Printer Settings > Paper Source Setting > Paper
Configuration .
Communication error.
Check if the computer is
connected. Make sure the computer and product are connected. For scanning, make
sure that Epson Scan 2, Epson ScanSmart, and Event Manager are installed
on the computer.