ProSoft Technology MVI56-PDPMV1 - Manual (Page 84)

Configuring the MVI56-PDPMV1 Module MVI56-PDPMV1 ♦ ControlLogix Platform
User Manual PROFIBUS DPV1 Master
Page 84 of 255 ProSoft Technology, Inc.
March 22, 2011
2.3 Configuring the PROFIBUS Master
In this task, you will configure the PROFIBUS Master, and then add PROFIBUS
slaves to the PROFIBUS network. When this step is complete, you will download
the configuration information to the MVI56 module. You will also export the I/O
maps for the processor.
1 In PCB tree view, click [+] to expand the MVI56-PDPMV1 tree, and then
double-click the PROFIBUS DP icon. This action opens the PDPMV1
PROFIBUS Master Setup dialog box.
2 In the PDPMV1 PROFIBUS Master Setup dialog box, click the C ONFIGURE
PROFIBUS button. This action opens the ProSoft Configuration Builder for
PROFIBUS application.
3 Click [+] to expand the PROFIBUS Master tree.
4 Drag the PROFIBUS Master icon into the Bus Configuration window. This is
automatically done by the software for new applications.
5 Double-click the PROFIBUS M ASTER
icon in the Bus Configuration window.
This action opens the Master Properties dialog box.
6 On the Common tab, name your PROFIBUS drop.
Note: The PROFIBUS tab contains the address setting and advanced configuration settings for the
Master. The default settings on this tab work best in most applications.
7 Click OK to save your changes and return to the Bus Configuration window.