ProSoft Technology MVI56-PDPMV1 - Manual (Page 24)

Start Here MVI56-PDPMV1 ♦ ControlLogix Platform
User Manual PROFIBUS DPV1 Master
Page 24 of 255 ProSoft Technology, Inc.
March 22, 2011
1.7 Using the MVI56-PDPMV1 Add-On Instruction
Note: This section applies only for applications with ControlLogix firmware version 16 or higher.
For earlier firmware versions, refer to Using the MVI56-PDPMV1 Sample Ladder Logic (page 23).
The Add-On Instruction (AOI) is supplied already installed as part of a complete
.ACD program file and also as an .L5X ladder import file that can be imported
into an existing or new application. Importing the AOI reduces module setup time
and simplifies your application logic. The .L5X file automatically imports the
following components into an application:
User-defined data types
Controller tags and tag arrays
Add-On Instruction logic
Ladder rung required to call the Add-On Instruction
This section will show the procedure on how to import the Add-On Instruction into
your existing ladder for both module modes (LEGACY or FLEX).
1.7.1 LEGACY Sample Add-On Instruction Import Procedure
Note: This section applies only if your application meets one or more of the following conditions:
MVI56-PDPMV1 module firmware version 0.30
MVI56-PDPMV1 module firmware version 1.21 (or later) AND configured in LEGACY mode
(U SE L EGACY M ODE = Y ES )
Before You Begin
The following file is required before you start this procedure. Copy the file from
the ProSoft Solutions CD-ROM, or download it from
www.prosoft-technology.com.
File Name Description
MVI56PDPMV1_LEGACY_v*.L5X
(where * is the current sample
program version number)
L5X file containing Add-On Instruction, user-defined data
types, controller tags and tag arrays, and ladder logic required
to set up the MVI56-PDPMV1 module in Legacy mode