ProSoft Technology MVI56-PDPMV1 - Manual (Page 104)

Configuring the MVI56-PDPMV1 Module MVI56-PDPMV1 ♦ ControlLogix Platform
User Manual PROFIBUS DPV1 Master
Page 104 of 255 ProSoft Technology, Inc.
March 22, 2011
2.3.3 Printing the Processor Network Memory Map
The Processor Memory Map dialog box uses the information about your
PROFIBUS Master and slaves to display the data types you configured. You will
need this information to determine the memory areas your application will use in
the ControlLogix processor.
To view or print the Processor Network Memory Map
1 On the Master Setup dialog box, click the S HOW M EMORY M AP
button, near
the bottom of the window.
This action opens the inRAx Data Type dialog box.
2 Notice that there are buttons in the Display area of the dialog box to show
I NPUTS
or O
UTPUTS
. These Input and Output maps correspond to the Input
and Output data you configured for the PROFIBUS Slaves (page 86). Notice
also that there are
CHECK BOXES
to optionally show (if checked) or hide (if not
checked) the slot numbers and PROFIBUS addresses.