ProSoft Technology MVI56-PDPMV1 - Manual (Page 57)

MVI56-PDPMV1 ♦ ControlLogix Platform Start Here
PROFIBUS DPV1 Master User Manual
ProSoft Technology, Inc. Page 57 of 255
March 22, 2011
3 Fill the module properties as required:
Parameter Value
Name Enter a module identification string. Example: MVI56PDPMV1_2
Description Enter a description for the module. Example: ProSoft communication
module for PROFIBUS communication.
Comm Format Select DATA-INT
Slot Enter the slot number in the rack where the MVI56-PDPMV1 module is
located.
Input Assembly
Instance
1
Input Size Enter the number of words per backplane input block to copy from the
module to the processor. The allowable range is from 12
TO 250 words.
Each input block will reserve 8 words for general purposes (CRC, block/CIP
handshaking). The remainder is reserved for PROFIBUS input data.
Output Assembly
Instance
2
Output Size Enter the number of words per backplane output block to copy from the
module to the processor. The allowable range is from 5
TO 248 words. Each
output block will reserve 5 words for general purposes (CRC and block
handshaking). The remainder is reserved for PROFIBUS output data.
Configuration
Assembly Instance
4
Configuration Size 0
4 Click OK to confirm. The new module is now visible:
5 Expand the Tasks folder, and then expand the MainTask folder.
6 On the MainProgram folder, click the right mouse button to open a shortcut
menu. On the shortcut menu, choose N
EW R OUTINE
.
7 In the New Routine dialog box, enter the name and description of your
routine, and then click OK.