ProSoft Technology MVI56-PDPMV1 User Manual
Page 22
Start Here
MVI56-PDPMV1 ♦ ControlLogix Platform
User Manual
PROFIBUS DPV1 Master
Page 22 of 255
ProSoft Technology, Inc.
March 22, 2011
1.5.4 Sample Program Summary
Use the following table to determine which sample program to use for your
application.
MVI56-PDPMV1
Version
ControlLogix
Version
Use Legacy
Mode
parameter
value
Sample Ladder
Add-On Instruction
0.30
13
-
MVI56PDPMV1_LEGACY_v13.ACD
-
0.30
15
-
MVI56PDPMV1_LEGACY_v15.ACD
-
0.30
16
-
MVI56PDPMV1_LEGACY_v16.ACD
MVI56PDPMV1_LEGACY_v1_3.L5X
1.21 or later
13
Y (LEGACY)
MVI56PDPMV1_LEGACY_v13.ACD
-
1.21 or later
15
Y (LEGACY)
MVI56PDPMV1_LEGACY_v15.ACD
-
1.21 or later
16
Y (LEGACY)
MVI56PDPMV1_LEGACY_v16.ACD
MVI56PDPMV1_LEGACY_v1_3.L5X
1.21 or later
17
Y (LEGACY)
MVI56PDPMV1_LEGACY_v17.ACD
MVI56PDPMV1_LEGACY_v1_3.L5X
1.21 or later
13
N (FLEX)
MVI56PDPMV1_FLEX_v13.ACD
-
1.21 or later
15
N (FLEX)
MVI56PDPMV1_FLEX_v15.ACD
-
1.21 or later
16
N (FLEX)
MVI56PDPMV1_FLEX_v16.ACD
MVI56PDPMV1_FLEX_v1_2.L5X
1.21 or later
17
N (FLEX)
MVI56PDPMV1_FLEX_v17.ACD
MVI56PDPMV1_FLEX_v1_2.L5X
Note: For ControlLogix version 16, you will use the Add-On Instruction (AOI) rung import (.L5X)
files, which encapsulate all the required ladder logic, controller tags, and user-defined data types
into a single import file; or you can use the version 16 ladder logic sample files (.ACD), which
already have the AOI files imported. The plain ladder logic sample files (.ACD) for versions 13 and
15 use the same logic as the AOI versions but display them as standard ladder logic. The separate
AOI .L5K file exists to make it easier to import the sample application into an existing project or
new project file. You do not need to import the AOI .L5K files into any of the .ACD ladder logic
sample programs. ControlLogix versions 15 and earlier do not support Add-On Instructions; so do
not try to import the AOI .L5K files into those older versions of RSLogix 5000.
For ControlLogix firmware version 16, refer to Using the MVI56-PDPMV1 Add-On Instructions
(page 24).
For ControlLogix firmware version 15 or older, Using the MVI56-PDPMV1 Sample Ladder
Logic (page 23).