ProSoft Technology MVI56-PDPMV1 - Manual (Page 23)

MVI56-PDPMV1 ♦ ControlLogix Platform Start Here
PROFIBUS DPV1 Master User Manual
ProSoft Technology, Inc. Page 23 of 255
March 22, 2011
1.6 Using the MVI56-PDPMV1 Sample Ladder Logic
If you will be using ControlLogix firmware versions 16 or higher, you may skip to
the section on Using the MVI56-PDPMV1 Add-On Instructions (page 24).
If you will be using ControlLogix firmware versions 13 or 15, then follow this
procedure:
1 Copy any of the sample programs you may want to use from the distribution
CD in a convenient folder on your local PC hard drive.
2 Start RSLogix 5000 and close any project or programs that may open
automatically when the program starts.
3 On the F ILE
menu, click the O
PEN
button.
4 Browse to the location where you saved the sample program files on your
local drive and select (left-mouse-click) the one that matches your firmware
version of your ControlLogix processor firmware.
5 Left-click the O PEN
button.
6 RSLogix will load the sample program.
The next step is to configure the correct controller type and slot number for your
application. For details, skip to the section on Common Settings for All Sample
Programs (page 65).
If you want to add the sample file to an existing application, do the following:
1 Open the RSLogix 5000 project .ACD file you wish to use.
2 In a separate instance of RSLogix 5000, open the sample ladder logic you
wish to use.
3 Follow the procedures for adding a Module to the project and setting
Connection Parameters, as found in Creating the MVI56-PDPMV1 Module
Profile - Legacy (page 25), Creating the MVI56-PDPMV1 Module Profile -
Flex (page 50), and Common Settings for All Sample Programs (page 65).
4 Manually copy the user-defined data types from the sample program and
paste them into your existing application.
5 Manually copy the controller tags from the sample program and paste them
into your existing application.
6 Manually copy the ladder logic tasks and rungs from the sample program and
paste them into your existing application.