TA Triumph-Adler 2256 - Manual (Page 89)

6-9
Sending Faxes from PC > Basic Transmission
2
Select settings.
The following settings can be specified.
Default Settings Dialog Box
By setting the transmission conditions that you use most in this dialog box, you can minimize the need to change the
settings each time.
The Default Settings dialog box can be accessed by the following procedure:
1
Display the screen.
1 Click the [ Start ] button on the taskbar, click [ Control Panel ], and then click [ View devices
and printers ].
2 Right click the name of the machine to be used as the network fax and select [ Printing
preferences ] from the resulting pull-down menu. Click the [ FAX TX Setting ] button in the
[ Printing Preferences ] window.
2
Configure the settings.
(1) Sender Information Tab
Enter your own information into fields explained below to send a cover page with your faxes.
Item Description
Page Size Select the size of the document being transmitted from the drop-down list.
Available settings: Letter (8.5 x 11 in.), Legal (8.5 x 14 in.), Ledger (11 x 17
in.), Statement (5.5 x 8.5 in.), A3 (11.69 x 16.54 in.), A4 (8.27 x 11.69 in.),
A5 (5.83 x 8.27 in.), Folio (8.27 x 12.99 in.), B4 (9.84 x 13.90 in.),
B5(JIS)(7.17 x 10.12 in.)
Orientation Specify whether the orientation of the document is portrait or landscape.
Available settings: Portrait, Landscape
Resolution Select the resolution of the document to be transmitted.
Available settings: 200x100dpi Normal, 200x200dpi Fine
FAX TX Setting Click [FAX TX Setting] to change the default settings for fax transmission.
The [
Default Settings ] screen will appear.