TA Triumph-Adler 2256 - Manual (Page 53)

3-14
Sending Faxes > Density
Density
Adjust density. Press the [ ▲ ] or [ ▼ ] key to select [Darker +3] to [Lighter -3].
Original Image
Select original image type.
2-sided Original
Select the type and orientation of the binding based on the original.
NOTE
When you want to increase the density of the original that has thin density, density needs to be adjusted to Darker.
When you want to reduce the density of the original that has thick density, density needs to be adjusted to Lighter.
Item Description
Text+Photo Best for mixed text and photo documents.
Photo Best for photos taken with a camera.
Text Sharply renders pencil text and fine lines.
NOTE
The optional document processor is required.
Item Description
1-sided Set when using a 1-sided sheet original.
2-sided Set when using a 2-sided sheet original that will be bound on the left or
right.
Detail Original
Binding Left/Right Set when using a 2-sided sheet original that will be bound on the left or
right.
Top Set when using a 2-sided sheet original that will be bound at the top.
Original Orientation To ensure that the originals are sent in the correct orientation for reading,
indicate which end of the original is the top. When the original is a two-
sided or facing pages original, the orientation of the original must be set.