TA Triumph-Adler 2256 - Manual (Page 113)

9-3
Fax Settings > Default fax settings
Report
Print reports to check the machine settings and status. Default settings for printing the result reports can also be
configured.
Common Settings
Configures overall machine operation.
Sound
Orig./Paper Set. (Original/Paper Settings)
Configure settings for originals and paper. For details, refer to the machine’s Operation Guide.
Item Description
Report
Print Status Page A status page provides information on a number of user setups. FAX-
related information includes the Local FAX Number, Local FAX Name, fax
line setting, etc. You can print it out as necessary.
Refer to Status Page on page 8-9 .
Admin Rpt
Set. Outgoing FAX Rpt An activity report is printed out automatically after every 50 faxes sent.
Value: Off, On
Refer to Activity Report on page 8-7 .
Incoming FAX Rpt An activity report is printed out automatically after every 50 faxes
received.
Value: Off, On
Refer to Activity Report on page 8-7 .
Result Rpt
Set. FAX TX Result Each time you send a fax, you can print a report to confirm whether the
fax was sent successfully.
Value: Off, On, Error Only, Specify Each Job
Refer to FAX TX Result Reports on page 8-5 .
Attach SendImage When [On], [Error Only] or [Specify Each Job] is selected, the transmitted
image is added to the report.
Value: Off, On
FAX RX Result When a fax is received, you can be notified by receipt result report.
Value: Off, On, Error Only
Refer to FAX RX Result Reports on page 8-6 .
Item Description
FAX Speaker Volume Adjust the volume of the speaker.
Speaker Volume: Volume of the built-in speaker when the line is connected by pressing the [
On
hook ] key.
Value : 5 Maximum, 4, 3 Medium, 2, 1 Minimum, 0 Mute
FAX Monitor Volume Adjust the volume of the monitor.
Monitor Volume: Volume of the built-in speaker when the line is connected without pressing the
[
On hook ] key such as in memory transmission.
Value : 5 Maximum, 4, 3 Medium, 2, 1 Minimum, 0 Mute