TA Triumph-Adler 2256 - Manual (Page 30)

2-4
Registering Destinations > Registering Destinations in the Address Book
3 Press [Change].
4 Press [ ▲ ] or [ ▼ ] to select [9600bps], [14400bps] or [33600bps].
5 Press the [ OK ] key.
6 Press the [  ] or [  ] key to select [ECM].
7 Press [Change].
8 Press [ ▲ ] or [ ▼ ] to select [On] or [Off].
ECM is a communication mode specified by the ITU-T (International Telecommunication
Union) that retransmits data when an error occurs. Fax machines that have ECM mode check
for errors as they communicate, preventing distortion of the image due to noise on the line and
other conditions.
9 Press the [ OK ] key.
10 Press the [ OK ] key.
7
Enter the address number.
1 Press the [  ] or [  ] key to select [Address Number].
2 Press [Edit].
3 Enter the address number.
Press the [ ▲ ], [ ▼ ] key or numeric keys to enter a particular Address Number (001-120).
Address Number is an ID for a destination.
NOTE
Normally the default setting should be used.
FAX Detail:
1/ 2 TX Start Speed:
Change
33600bps
FAX Detail:
2/ 2 ECM:
Change
On
Detail:
3/ 3
053
Edit
Address Number:
Address Number:
053
(001 - 120)