Cancelling the transmission, Cancelling the transmission -7 – TA Triumph-Adler 2256 User Manual
Page 46
3-7
Sending Faxes > Basic transmission procedure
Cancelling the Transmission
The method for cancelling communication with this machine differs depending on the transmission method (memory
transmission or direct transmission) and communication form. Methods of cancelling in various cases are explained
here.
Cancelling Memory Transmission (while originals are being scanned)
1
Press the [
Stop
] key.
During memory transmission, to cancel scanning while originals are being scanned, press the
[
Stop
] key on the operation panel.
Scanning of originals is canceled, and the originals are ejected. When originals remain in the
document processor, take them out from the original eject table.
Cancelling Memory Transmission (during communication)
1
Press the [
Stop
] key.
2
Display the send job list screen.
1
Press the [
▲
] or [
▼
] key to select [Send Job List].
2
Press the [
OK
] key.
Display the send job list screen.
3
Canceling Transmission.
1
Press the [
▲
] or [
▼
] key to select the job to cancel.
2
Press [Menu].
3
Press the [▲] or [▼] key to select [Cancel Job].
4
Press the [
OK
] key.
5
Press [Yes] in the confirmation screen. The selected job is deleted.
NOTE
Even if transmission is canceled, there is a possibility that pages scanned prior to cancelation were sent to the
receiving party. Check with the receiving party to see if pages were accidentally sent.
Send Job List:
0008
0009
0010
0123456789
1234567890
2345678901
Resume
Menu