TA Triumph-Adler 2256 - Manual (Page 48)

3-9
Sending Faxes > Methods For Entering the Destination
Methods For Entering the Destination
Entering the destination fax number with the numeric keys
The procedure for entering the destination fax number with the numeric keys is explained below.
1
Press the [ FAX ] key.
2
Enter the fax number of the receiving system using the numeric keys.
Up to 64 digits can be entered as the fax number of the receiving system.
Pressing the [ Address Recall/Pause ] key adds about three seconds of waiting time during
dialing. For example, when dialing the receiving system on an external line, you can use this
method to insert a pause before resuming dialing after you dial a specific number.
3
Press the [ OK ] key.
Changing the Settings of TX Start Speed and ECM
Follow the steps below to change TX Start Speed and ECM settings.
1 Press [Details] after entering the FAX number of the destination.
NOTE
You can change the settings of TX Start Speed and ECM by pressing [ Details ]. Refer to
Changing the Settings of TX Start Speed and ECM on page 3-9 .
NOTE
To send to multiple destinations, enter the next fax number and press the [ OK ] key. You can
send to as many as 100 destinations at once.
FAX No. Entry:
Chain Detail
0123456789
FAX No. Entry:
Chain Detail
0123456789