TA Triumph-Adler 2256 - Manual (Page 20)

1-6
Setting up the Machine > Setting Date and Time
Setting Date and Time
Set the local date and time at the place of installation.
When you send a fax using the transmission function, the date and time as set here will be printed in the header of the
fax. Set the date, time and time difference from GMT of the region where the machine is used.
1
Display the screen.
1 Press the [ Status/System Menu/Counter ] key.
2 Press the [ ▲ ] or [ ▼ ] key to select [Common Settings].
3 Press the [ OK ] key.
4 Press the [ ▲ ] or [ ▼ ] key to select [Date Settings].
5 Press the [ OK ] key.
2
Set the time difference.
1 Press the [ ▲ ] or [ ▼ ] key to select [Time Zone].
2 Press the [ OK ] key.
3 Press the [ ▲ ] or [ ▼ ] key to set the time zone.
4 Press the [ OK ] key.
3
Set the date and time.
1 Press the [ ▲ ] or [ ▼ ] key to select [Date/Time].
2 Press the [ OK ] key.
NOTE
Be sure to set the time difference before setting the date and time.
NOTE
If the login user name entry screen appears during operations, log in by referring to the
machine's Operation Guide for Administrator User Name and Password.
The factory default login user name and login password are set as shown below.
Login User Name Login Password
Admin *1
*1 Upper case and lower case letters are distinguished (case sensitive).
Admin *1