Program, Registering program, Program -19 – TA Triumph-Adler 2256 User Manual
Page 58: Registering program -19
3-19
Sending Faxes > Program
Program
By registering sets of frequently used functions as a single program, you can simply select the program number as
needed to recall those functions. You can also name the programs for easy identification when recalling.
Registering Program
Use the procedure below to register a program.
1
Set the destination and transmitting functions.
Destination to which FAX is transmitted and transmitting functions need to be set in advance.
Methods For Entering the Destination
page 3-1
2
Register the program.
1
Press the [
Program
] key.
2
Press the [
▲
] or [
▼
] key to select a program number (01 to 10) to register.
3
Press [Menu].
4
Press the [
▲
] or [
▼
] key to select [Add].
5
Press the [
OK
] key.
6
Enter a program name using the numeric keys.
For details on character entry, refer to
Character Entry Method on page 11-2
7
Press the [
OK
] key. The program is registered.
NOTE
Unregistered program numbers are displayed with [----------------].
If you select a program number already registered, the currently registered functions can be
replaced with a new set of functions.
NOTE
When the screen for selecting job type appears, press the [
▲
] or [
▼
] key to select [FAX]
and press the [
OK
] key.
Select program:
Program 01
Menu
01
Program 02
02
Program 03
03