TA Triumph-Adler 2256 - Manual (Page 57)

3-18
Sending Faxes > FAX TX Report
Cancelling Delayed Transmissions
Use the procedure below to cancel the delayed transmission.
1
Display the screen.
1 Press the [ Status/System Menu/Counter ] key.
1 Press the [ ▲ ] or [ ▼ ] key to select [Status].
2 Press the [ OK ] key.
3 Press the [ ▲ ] or [ ▼ ] key to select [Scheduled Job].
4 Press the [ OK ] key.
Display the scheduled job screen.
2
Canceling a job.
1 Press the [ ▲ ] or [ ▼ ] key to select the job to cancel.
2 Press [Cancel].
3 Press [Yes] in confirmation screen. The selected job is deleted.
FAX TX Report
You can check whether FAX was transmitted properly by printing the report after transmission.
Item Description
Off Does not print reports.
On Prints reports.
Error Only Prints reports only if an error occurs.
NOTE
This setting is displayed if FAX TX Result Reports is set to [Specify Each Job]. For details, refer to FAX TX Result
Reports on page 8-5 .
Scheduled Job:
Cancel Menu
0010
0011
0012
0123456789
1234567890
2345678901