Reception – TA Triumph-Adler 2256 User Manual
Page 115
9-5
Fax Settings > Default fax settings
Reception
ECM TX
Set whether ECM TX is performed.
ECM is a communication mode specified by the ITU-T (International Telecommunication Union)
that retransmits data when an error occurs. Fax machines that have ECM mode check for
errors as they communicate, preventing distortion of the image due to noise on the line and
other conditions.
Value
: On, Off
NOTE
When there is a large amount of noise on the line, communication may take slightly
longer than when [Off] is selected.
TX Start Speed
Set the TX Start Speed.
When communication conditions are bad, the fax may not be transmitted correctly. In that case,
set a lower TX Start Speed.
Value
: 9600bps, 14400bps, 33600bps
NOTE
Normally this should be used with the default setting.
Item
Description
FAX Media Type
Specify the paper type to be used for print output of the received fax.
Value
: All Media Type, Plain, Rough, Vellum, Recycled, Bond, Color, Thick, High Quality,
Custom 1-8
Media Type for Print Output on page 4-6
.
Rings(Normal)
If the reception method is fax automatic reception, the number of rings until the machine
answers a call can be changed as needed.
NOTE
This setting does not appear in some regions.
Rings(TAD)
If the reception method is FAX/Answering Machine Auto Switch Reception, the number of rings
until the machine answers a call can be changed as needed.
NOTE
This setting does not appear in some regions.
Rings(FAX/TEL)
If the reception method is FAX/TEL Auto Switch Reception, the number of rings until the
machine answers a call can be changed as needed.
NOTE
This setting does not appear in some regions.
Forward Settings
Configure Forward Settings.
.
RX Settings
Select the reception mode.
Value:
Auto(Normal), Auto(FAX/TEL), Auto(TAD), Auto(DRD), Manual
NOTE
DRD reception mode is only available for Australia and New Zealand. This setting
does not appear in other regions.
Item
Description