TA Triumph-Adler 2256 - Manual (Page 135)

10-7
Troubleshooting > Troubleshooting
Troubleshooting
When a problem occurs, first check the following. If the problem persists, contact your dealer or service representative.
Symptom Checkpoint Corrective Action Reference
Page
Cannot send document. Is the modular cord connected
correctly? Connect the modular cord correctly. ―
Is Send error displayed? Remedy the cause of error and send
again. 10-5
Is TX (transmission) restriction
activated? Cancel the TX restriction. 9-8
Cannot use the remote
switching function. Is a pulse line used? Some phones may transmit tone signals
using buttons. Refer to the operation
manual of your phone set. ―
Is the remote switching number
correct? Check the registration. (Default: 55) 7-9
No print output after reception. Is memory forwarding activated? Check the forwarding destination. 5-2
Cannot receive document. Is the modular cord connected
correctly? Connect the modular cord correctly. ―
Is Communication error
displayed? Remedy the cause of error and ask the
sender to retry. 10-5
Is RX (reception) restriction
activated? Cancel the RX restriction. 9-8
Cannot perform memory
reception. Is free space available in the
memory? Receive after the memory has free space,
or create free space in the memory. ―
Cannot perform memory
forwarding. Is memory forwarding set to
[On]? Check the memory forwarding setting. 5-2