TA Triumph-Adler 2256 - Manual (Page 42)

3-3
Sending Faxes > Basic transmission procedure
5
Selecting the functions.
The following functions can be set for FAX transmission.
• Density  page 3-14
• Original Image  page 3-14
• 2-sided Original  page 3-14
• Original Size  page 3-16
• FAX Resolution  page 3-16
• File Name Entry  page 3-16
• FAX Delayed Transmission  page 3-17
• FAX TX Report  page 3-18
• Program  page 3-19
6
Send Start.
Press the [ Start ] key.
When scanning finishes, transmission starts.
When originals are placed in the document processor
After originals placed in the document processor are scanned and stored in the memory, the
receiving system is dialed.
When originals are placed on the glass surface
After originals placed on the glass surface are scanned and stored in the memory, the
receiving system is dialed.
NOTE
When continuous scan is set, you can continue with scanning of a next original after an
original on the glass surface has been stored in memory. Every time one page is scanned,
you perform an operation to allow continued scanning, and after all the originals have been
stored in memory, the receiving system is dialed.