Manual reception, Using the telephone to receive, Manual reception -4 – TA Triumph-Adler 2256 User Manual
Page 67: Using the telephone to receive -4
4-4
Receiving Faxes > Manual Reception
Manual Reception
This method allows you to receive faxes by pressing the [
On hook
] key after confirming that the telephone line has
connected to the sending system.
Using the Telephone to Receive
You can confirm that the connection has been made before receiving a fax.
1
When there is an incoming call, the telephone connected to the machine
makes a ringing tone.
2
Lift the handset of the telephone.
3
Check if the telephone line has connected to the fax of the sending
system.
When you hear the fax tone
The sending system is on fax.
1
Press the [
FAX
] key.
2
Press the [
On hook
] key.
3
Press [ManualRX].
Reception will start.
NOTE
To use Manual Reception, you need to change the receiving mode to Manual Reception. To change to manual mode,
refer to
Connecting a telephone set (commercially available product) to this machine enables you to receive originals after
talking to the person at the sending system.
NOTE
When using a telephone set that can send tone signals, use the telephone to start the
reception of originals with the remote switch function. (Refer to
.)
On Hook:
ManualRX