TA Triumph-Adler 2256 - Manual (Page 59)

3-20
Sending Faxes > Program
Confirming the Registered Program
The settings of the registered program can be confirmed by recalling the program. Refer to Recalling Program on page
3-20 .
Recalling Program
Use the procedure below to recall a registered program.
1
Recall the program.
1 Press the [ Program ] key.
2 Press the [ ▲ ] or [ ▼ ] key to select a program number (01 to 10) to recall.
3 Press the [ OK ] key.
2
Execute the program.
Place the originals and press the [ Start ] key. Transmission starts.
Overwriting Program
Programs can be changed with the same procedures as those for registering programs. When selecting the program
number to be registered, select the program to be changed and overwrite the program number. Refer to
Registering
Program on page 3-19 .
NOTE
Up to 32 characters can be entered.
If the program number is already used in any of the existing programs, the change
confirmation screen appears. Press [Yes].
The settings can be confirmed by recalling the program. Refer to Recalling Program on
page 3-20 .
Select program:
Program 01
Menu
01
Program 02 02
Program 03 03