Precision Digital PD6310 - Manual (Page 73)

Model PD6210 & PD6310 Batch Controllers Instruction Manual
73
Function Keys Operation
During operation, the programmable function keys operate according to
the way they have been programmed in the Advanced Features – User
menu. The following table shows the default setting for each of the func-
tion keys.
Function Key/Button Default Setting Action
F1/START Start Start batch
F2/BATCH preset Change preset
F3/STOP stop Pause/stop batch
!
Only STOP Operation Enabled if a Batch is Running.
During a batch process, the only function that can be
performed is the pause/stop functions of the STOP button;
the default programming of the F3 key. No other functions,
including min/max display, manual alarm reset, or total
reset, will function while a batch is running.
Programmable Function Keys User Menu (user)
The User menu allows the user to assign the front panel function keys
F1, F2, F3 and up to eight digital inputs to access most of the menus or
to activate functions immediately (e.g. Reset max & min). Up to eight
digital outputs can be assigned to a number of actions and functions
executed by the controller (e.g. Alarms, relay acknowledgement, etc.).
user
dI 1
user
dO 8
user
dO 1
user
dI 8
user
F1
user
F3
user
F2
user
!
Changing the programming of the F1-F3 function keys will
disable the default batch operation of these keys, and is
not recommended for batch control applications.