Precision Digital PD6310 - Manual (Page 40)

Model PD6210 & PD6310 Batch Controllers Instruction Manual
40
Display Parameter Action/Setting Description
OFF Off Relay goes to non-alarm condition when
loop break is detected
Aout Analog output Enter the Analog output scaling menu
Dis 1 Display 1 Program display 1 value
Out 1 Output 1 Program output 1 value (e.g. 4.000 mA)
Dis 2 Display 2 Program display 2 value
Out 2 Output 2 Program output 2 value (e.g. 20.000 mA)
pass Password Enter the Password menu
Pass 1 Password 1 Set or enter Password 1
Pass 2 Password 2 Set or enter Password 2
Pass 3 Password 3 Set or enter Password 3
Total Total
password Set or enter password for manual reset
Gtotal Grand total
password Set or enter password for manual reset
nonrst Non-
resettable Non-resettable grand total set after enter-
ing “050873” for Gtotal password
unloc Unlocked Program password to lock controller
locd Locked Enter password to unlock controller
999999
-99999 Flashing
display Overrange condition
Underrange condition
1. During operation, only the STOP button will function, to stop/pause
the batch. As a result, relay alarms cannot be manually reset.
2. This setting used for level control applications. It is not appropriate if
using this controller for batching applications.