External relay & digital i/o connections, Figure 19: external relays module connections – Precision Digital PD6310 User Manual
Page 29
Model PD6210 & PD6310 Batch Controllers
Instruction Manual
29
External Relay & Digital I/O Connections
The relay and the digital I/O expansion modules PDA1004 & PDA1044
are connected to the controller using a CAT5 cable provided with each
module. The two RJ45 connectors on the expansion modules are iden-
tical and interchangeable; they are used to connect additional modules
to the system.
Note: The jumper located between the RJ45 connectors of the PDA1044
must be removed on the second digital I/O module in order for the
system to recognize it as module #2.
Warning!
Do not connect or disconnect the expansion modules
with the power on!
More detailed instructions are provided with each op-
tional expansion module.
Figure 18: Expansion Modules & DIN Rail Mounting Kit
1
2
RLY5
RLY6
RLY7
RLY8
3
4
5
6
7
8
NO
C
NO
C
NO
C
NO
C
Figure 19: External Relays Module Connections