Epson Stylus Scan 2500 - Manual (Page 239)

12-16 Troubleshooting
R4C427_V2
long.bk
Rev_C
A5 size TRBLE.FM
2/1/00 Pass 2
L Proof Sign-off:
K. Nishi, K. Gazan _______
N. Nomoto
_______
J. Hoadley _______
❏ If you are using a Macintosh, check the settings in the Page
Setup dialog box. Make sure they’re correct for the paper size
you’re using.
❏ Run the Head Cleaning utility to clear any clogged nozzles.
After trying one or more of these solutions, run a printing
operation check to see whether the problem has been solved. See
“Running a printer operation check” on page 12-4.
Printing is too slow
Try one or more of these solutions.
❏ Make sure the Media Type setting is set correctly in your
printer driver. For instructions, see “Making the Media Type
setting” on page 4-4 for Windows or “Making the Media Type
settings” on page 6-3 for Macintosh.
❏ To increase speed, select the Automatic mode and then set
the slide bar to the Speed setting. For instructions, see “Using
the Automatic setting” on page 4-7 for Windows or “Using
the Automatic setting” on page 6-6 for Macintosh.
❏ Do not run unnecessary applications at the same time. Close
any applications you are not using at the moment.
❏ Delete unnecessary files to make room on your hard disk
drive.
Note:
Your computer may not have enough memory. For further tips, See
“Increasing the Print Speed” on page 4-27.
❏ If you upgraded from Windows 95 to Windows 98, uninstall
the EPSON Stylus Scan software using Add/Remove
Programs in Windows, then install the software again.