Epson Stylus Scan 2500 - Manual (Page 126)

Scanner 8-21
R4C427_V2
long.bk
Rev_C
A5 size SCAN.FM
2/1/00 Pass 2
R Proof Sign-off:
K. Nishi, K. Gazan _______
N. Nomoto
_______
J. Hoadley _______
4 x 5 inch film
Insert film in the 4
×
5 inch film holder, base side facing down.
Loading slides and film
You can scan slides and film strips in the 4
×
5 inch (101.6
×
127
mm) scanning area of the Film Adapter.
Note:
❏ Wipe the glass of the Film Adapter, the Stylus Scan’s document
table, and the narrow window near the hinges before scanning
transparencies.
❏ You need to select TPU for Neg. Film or TPU for Pos. Film in the
Document Source settings in EPSON TWAIN depending on the
type of film (negative or positive) you are scanning. The scanner
software automatically controls the operation of the Film Adapter.
Follow the steps below to load film or slides.
c
Caution:
Hold the film at the edges, or use gloves. Touching the film surface
can leave fingerprints or otherwise damage the film.