Epson Stylus Scan 2500 - Manual (Page 228)

Troubleshooting 12-5
R4C427_V2
long.bk
Rev_C
A5 size TRBLE.FM
2/1/00 Pass 2
R Proof Sign-off:
K. Nishi, K. Gazan _______
N. Nomoto
_______
J. Hoadley _______
If the Stylus Scan is connected to the parallel interface
(Windows systems only): Unlock the wire clips on both sides
of the interface connector, and remove the ground connector,
if necessary. Then disconnect the cable from the Stylus Scan’s
interface connector.
3. Make sure that A4 or Letter size paper is loaded in the sheet
feeder.
4. Hold down the
E
load/eject button and press the
P power
button to turn on the Stylus Scan. Then release both buttons.
The Stylus Scan prints an operation check page that includes
the Stylus Scan's ROM version number, the ink counter code,
and a nozzle check pattern.