Yaskawa R1000 Series Power Regenerative Unit - Manual (Page 64)

3.10 Control I/O Connections
64 YASKAWA ELECTRIC TOEP C710656 08B YASKAWA Power Regenerative Unit - R1000 Instruction Manual
Table 3.11 DIP Switch S1 Settings
Table 3.12 Parameter H3-09 Details
◆ Using the Contact Outputs
Figure 3.29 illustrates the use of multi-function relay outputs and the fault relay outputs.
Figure 3.26
Figure 3.29 Contact Outputs
Setting Description
V (left position) Voltage input (-10 to +10 V or 0 to 10 V)
I (right position) Current input (4 to 20 mA or 0 to 20 mA): default setting
No. Parameter Name Description
Setting
Range
Default
Setting
H3-09 Terminal A2 signal level selection
Selects the signal level for terminal A2.
0: 0 to 10 Vdc
1: -10 to 10 Vdc
2: 4 to 20 mA
3: 0 to 20 mA
0 to 3 2
<1> Minimum load: 5 Vdc, 10 mA
M
M
5
3
4
M
M 6
MA
M1
M2
MB
MC
Relay
SA
SA
Max
250 Vac Relay
Relay
Relay
Max 250 Vac
Max 250 Vac
Controller
Multi-function relay output <1>
250 Vac, max. 1 A
30 Vdc, max. 1 A
Fault relay output <1>
250 Vac, max. 1 A
30 Vdc, max. 1 A
Through mode
Fault
Through mode
Through mode
Regenerative Unit
YAI
TOEP_C710656_08B_1_0.book 64 ページ ２０１５年２月５日 木曜日 午前１０時７分