Yaskawa R1000 Series Power Regenerative Unit - Manual (Page 29)

2.2 Mechanical Installation
YASKAWA ELECTRIC TOEP C710656 08B YASKAWA Power Regenerative Unit - R1000 Instruction Manual 29
Mec
h
an
ic
al
In
st
al
la
tio
n
2
◆ Digital Operator Remote Usage
■ Remote Operation
The digital operator mounted on the regenerative unit can be removed and connected to the regenerative unit using an
extension cable up to 3 m long to facilitate operation when the regenerative unit is installed in a location where it can not
be easily accessed.
The digital operator can also be permanently mounted in remote locations such as panel doors using an extension cable
and an installation support set (depending on the installation type).
■ Digital Operator Dimensions
Figure 2.7 Digital Operator Dimensions
<1> If you install the digital operator in a control panel or other enclosure, use the optional connection cable.
S / N : J007XE273710001
Operator
Communication Cable Connector
Communication
Cable Connector
Regenerative Unit
D1000
S / N : J007XE273710001
90
78
60
7.9
minimum
50 Unit: mm
12.2 1.6 Installation holes (2-M3 screws, depth 5)
44
15
<1>
YAI
TOEP_C710656_08B_1_0.book 29 ページ ２０１５年２月５日 木曜日 午前１０時７分