Yaskawa R1000 Series Power Regenerative Unit - Manual (Page 30)

2.2 Mechanical Installation
30 YASKAWA ELECTRIC TOEP C710656 08B YASKAWA Power Regenerative Unit - R1000 Instruction Manual
■ Installation Types and Required Materials
The digital operator mounts to an enclosure two different ways:
• External/face-mount installs the operator outside the enclosure panel
• Internal/flush-mount installs the operator inside the enclosure panel
Table 2.2 Digital Operator Installation Methods and Required Tools
NOTICE: Prevent foreign matter such as metal shavings or wire clippings from falling into the drive or regenerative unit during
installation and project construction. Failure to comply could result in damage to the drive or regenerative unit. Place a temporary cover
over the top of the drive and regenerative unit during installation. Remove the temporary cover before drive and regenerative unit
start-up, as the cover will reduce ventilation and cause the drive or regenerative unit to overheat.
◆ Exterior and Mounting Dimensions
Use Table 2.3 to find the regenerative unit dimension drawings.
Table 2.3 Models and Types
Installation
Method
<1> If there are welding studs in the control panel, use the Installation Support Set B (for threaded studs).
Description
Installation
Support Sets
Model Required Tools
External/
Face-Mount
Simplified installation with the
digital operator is mounted on
the outside of the panel with
two screws.
– –
Phillips screwdriver
(#1)
Internal/
Flush-Mount
Encloses the digital operator in
the panel. The front of the
digital operator is flush with
the outside of the panel.
Installation Support Set A
(for mounting with screws through
holes in the panel)
EZZ020642A
Phillips screwdriver
(#1, #2)
Installation Support Set B
(for use with threaded studs that are
fixed to the panel) <1>
EZZ020642B
Phillips screwdriver (#1)
Wrench (7 mm)
Protective
Design
Regenerative Unit Model
Page Three-Phase
200 V Class
Three-Phase
400 V Class
IP20/NEMA Type 1 Enclosure
2A03P5
2A0005
2A0007
2A0010
2A0014
2A0017
2A0020
2A0028 4A03P5
4A0005
4A0007
4A0010
4A0014
4A0017
4A0020
4A0028
31
IP00/Open Type Enclosure
2A0035
2A0053
2A0073
2A0105
4A0035
4A0043
4A0053
4A0073
4A0105
4A0150
4A0210
4A0300
32
TOEP_C710656_08B_1_0.book 30 ページ ２０１５年２月５日 木曜日 午前１０時７分