SMA MLX Series - Manual (Page 28)

NOTICE
If the desired grid code is not available, or if the LCS
Tool warns about incompatible software versions, the
grid code and software library must be updated on the
LCS Tool.
For utility-interactive inverters, field adjustable trip limits
and trip times can be altered from default settings. See
5.2 Trip Settings. After user registration and authorisation,
authorised service personnel can generate new grid code
settings at www.sma.de. The new grid code settings can be
downloaded as a file and applied to the MLX inverters via
the LCS Tool. These grid code files are encoded and can
only be used for the particular installation.
Initial Setup and Start
L00410644-01_2q / Rev. date: 2014-06-02 27
3 3