SMA MLX Series - Manual (Page 13)

2 Installation
2.1 Environment and Clearances
Illustration 2.1 Avoid Constant Stream of Water
Illustration 2.2 Avoid Direct Sunlight
Illustration 2.3 Ensure Adequate Air Flow
Illustration 2.4 Ensure Adequate Air Flow
Illustration 2.5 Mount on Non-flammable Surface
Illustration 2.6 Mount Upright on Vertical Surface. Backwards
tilt of up to 10 degrees is permitted
Illustration 2.7 Prevent Dust and Ammonia Gases
NOTICE
When planning the installation site, ensure that the
inverter product label and warning labels remain visible.
For details, refer to 5 Technical Data.
Installation
12 L00410644-01_2q / Rev. date: 2014-06-02
2 2